Printing and Job Specifications

We pride ourselves on the fact that we achieve 24 hour turnaround time with most banner finishing jobs. To make this possible we ask that you provide us with printed media that meets the following specifications.

If possible, all bleed measurements should include cut lines.

If you have any questions about non-standard jobs please contact us.

Finishing Options

For Eyelets and Welding Only – please leave:

  • 30 mm bleed on each side

See example measurements.

weld-and-eyelets-specifications
  

For Rope and Welding Only – please leave:

  • 30 mm bleed on each side edge
  • 50 mm bleed on top and bottom edges

See example measurements.

rope-and-eyelets-specifications
  

For Kedar edges- please provide us with a banner that is

  • 14 mm less than total length and width of required size.

See example measurements.

kedar-job-specifications
  

If you would like multiple banners weldedtogether please:

  • Leave 30mm bleed on the top edge of the bottom panel. This should not be printed on.
  • No bleed on the bottom edge of the top panel
  • Do all other panels as per your chosen method of banner finishing

See example measurements.

multi-panel-job-specifications

For PVC Cord please leave:

  • 20mm on each edge.

For welded pockets suitable for 20 mm rods please leave:

  • 75mm bleed on the top and bottom edges
  • Please contact us if you are looking to use a different sized rod.

See example measurements.

welded-pockets-specifications